ecl: update to 21.2.1.

Also:
- remove fix-libffi-system.patch (not needed anymore)
- clean-up fix-math_fenv_h.patch
  upstream: https://gitlab.com/embeddable-common-lisp/ecl/-/issues/653#note_675299471
- add long long, int64_t and uint64_t in all the cross_config files;
  compilation fails when long long is enabled in host but disabled in target.
- replace the per-arch cross_config files by a single one, which is
  conditional on $XBPS_TARGET_WORDSIZE and $XBPS_TARGET_ENDIAN.

srcpkgs/ecl/files/aarch64-musl.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE="long long int"
-CL_FIXNUM_BITS=64
-CL_FIXNUM_MAX=2305843009213693951LL
-CL_FIXNUM_MIN=-2305843009213693952LL
-CL_INT_BITS=32
-CL_LONG_BITS=64
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=no
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=uint64_t
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=int64_t
-ECL_LONG_LONG_BITS=64
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		aarch64-unknown-linux-gnu
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/aarch64.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE="long long int"
-CL_FIXNUM_BITS=64
-CL_FIXNUM_MAX=2305843009213693951LL
-CL_FIXNUM_MIN=-2305843009213693952LL
-CL_INT_BITS=32
-CL_LONG_BITS=64
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=no
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=uint64_t
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=int64_t
-ECL_LONG_LONG_BITS=64
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		aarch64-unknown-linux-gnu
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/armv5tel-musl.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE=int
-CL_FIXNUM_BITS=32
-CL_FIXNUM_MAX=536870911L
-CL_FIXNUM_MIN=-536870912L
-CL_INT_BITS=32
-CL_LONG_BITS=32
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=no
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=no
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=no
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		arm-unknown-linux-musleabi
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		i686-pc-linux-musl
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/armv5tel.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE=int
-CL_FIXNUM_BITS=32
-CL_FIXNUM_MAX=536870911L
-CL_FIXNUM_MIN=-536870912L
-CL_INT_BITS=32
-CL_LONG_BITS=32
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=no
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=no
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=no
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		arm-unknown-linux-gnueabi
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		i686-pc-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/armv6l-musl.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE=int
-CL_FIXNUM_BITS=32
-CL_FIXNUM_MAX=536870911L
-CL_FIXNUM_MIN=-536870912L
-CL_INT_BITS=32
-CL_LONG_BITS=32
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=no
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=no
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=no
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		armv7l-unknown-linux-musleabihf
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/armv6l.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE=int
-CL_FIXNUM_BITS=32
-CL_FIXNUM_MAX=536870911L
-CL_FIXNUM_MIN=-536870912L
-CL_INT_BITS=32
-CL_LONG_BITS=32
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=no
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=no
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=no
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		armv7l-unknown-linux-musleabihf
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/armv7l-musl.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE=int
-CL_FIXNUM_BITS=32
-CL_FIXNUM_MAX=536870911L
-CL_FIXNUM_MIN=-536870912L
-CL_INT_BITS=32
-CL_LONG_BITS=32
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=no
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=no
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=no
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		armv7l-unknown-linux-gnueabihf
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/armv7l.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE=int
-CL_FIXNUM_BITS=32
-CL_FIXNUM_MAX=536870911L
-CL_FIXNUM_MIN=-536870912L
-CL_INT_BITS=32
-CL_LONG_BITS=32
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=no
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=no
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=no
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		armv7l-unknown-linux-gnueabihf
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/cross_config

@@ -12,15 +12,28 @@
 ECL_STACK_DIR=down
 
 ### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE="long long int"
+if [ "$XBPS_TARGET_WORDSIZE" = "64" ]; then
-CL_FIXNUM_BITS=64
+	CL_FIXNUM_TYPE="long long int"
-CL_FIXNUM_MAX=2305843009213693951LL
+	CL_FIXNUM_BITS=64
-CL_FIXNUM_MIN=-2305843009213693952LL
+	CL_FIXNUM_MAX=2305843009213693951LL
-CL_INT_BITS=32
+	CL_FIXNUM_MIN=-2305843009213693952LL
-CL_LONG_BITS=64
+	CL_INT_BITS=32
+	CL_LONG_BITS=64
+else
+	CL_FIXNUM_TYPE=int
+	CL_FIXNUM_BITS=32
+	CL_FIXNUM_MAX=536870911L
+	CL_FIXNUM_MIN=-536870912L
+	CL_INT_BITS=32
+	CL_LONG_BITS=32
+fi
 
 ### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=no
+if [ "$XBPS_TARGET_ENDIAN" = "le" ]; then
+	ECL_BIGENDIAN=no
+else
+	ECL_BIGENDIAN=yes
+fi
 
 ### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
 ###      CR (Carriage return or \r), and CRLF (CR followed by LF).

srcpkgs/ecl/files/mips-musl.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE=int
-CL_FIXNUM_BITS=32
-CL_FIXNUM_MAX=536870911L
-CL_FIXNUM_MIN=-536870912L
-CL_INT_BITS=32
-CL_LONG_BITS=32
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=yes
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=no
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=no
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		mips-unknown-linux-musl
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/mipsel-musl.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE=int
-CL_FIXNUM_BITS=32
-CL_FIXNUM_MAX=536870911L
-CL_FIXNUM_MIN=-536870912L
-CL_INT_BITS=32
-CL_LONG_BITS=32
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=no
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=no
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=no
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		mips-unknown-linux-musl
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/mipselhf-musl.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE=int
-CL_FIXNUM_BITS=32
-CL_FIXNUM_MAX=536870911L
-CL_FIXNUM_MIN=-536870912L
-CL_INT_BITS=32
-CL_LONG_BITS=32
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=no
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=no
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=no
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		mips-unknown-linux-musl
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/mipshf-musl.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE=int
-CL_FIXNUM_BITS=32
-CL_FIXNUM_MAX=536870911L
-CL_FIXNUM_MIN=-536870912L
-CL_INT_BITS=32
-CL_LONG_BITS=32
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=yes
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=no
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=no
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		mips-unknown-linux-musl
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/ppc-musl.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE=int
-CL_FIXNUM_BITS=32
-CL_FIXNUM_MAX=536870911L
-CL_FIXNUM_MIN=-536870912L
-CL_INT_BITS=32
-CL_LONG_BITS=32
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=yes
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=no
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=no
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		powerpc-unknown-linux-musl
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		i686-pc-linux-musl
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/ppc.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE=int
-CL_FIXNUM_BITS=32
-CL_FIXNUM_MAX=536870911L
-CL_FIXNUM_MIN=-536870912L
-CL_INT_BITS=32
-CL_LONG_BITS=32
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=yes
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=no
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=no
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		powerpc-unknown-linux-gnu
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		i686-pc-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/ppc64-musl.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE="long long int"
-CL_FIXNUM_BITS=64
-CL_FIXNUM_MAX=2305843009213693951LL
-CL_FIXNUM_MIN=-2305843009213693952LL
-CL_INT_BITS=32
-CL_LONG_BITS=64
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=yes
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=uint64_t
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=int64_t
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		powerpc64-unknown-linux-musl
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-musl
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/ppc64.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE="long long int"
-CL_FIXNUM_BITS=64
-CL_FIXNUM_MAX=2305843009213693951LL
-CL_FIXNUM_MIN=-2305843009213693952LL
-CL_INT_BITS=32
-CL_LONG_BITS=64
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=yes
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=uint64_t
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=int64_t
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		powerpc64-unknown-linux-gnu
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/ppc64le-musl.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE="long long int"
-CL_FIXNUM_BITS=64
-CL_FIXNUM_MAX=2305843009213693951LL
-CL_FIXNUM_MIN=-2305843009213693952LL
-CL_INT_BITS=32
-CL_LONG_BITS=64
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=no
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=uint64_t
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=int64_t
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		powerpc64le-unknown-linux-musl
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-musl
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/files/ppc64le.conf

@@ -1,63 +0,0 @@
-###
-### YOU ARE TRYING TO CROSS COMPILE ECL.
-### PLEASE FOLLOW THESE INSTRUCTIONS:
-###
-### 1) Vital information cannot be determined at configuration time
-### because we are not able to run test programs. A file called
-###		
-### has been created, that you will have to fill out. Please do
-### it before invoking "configure" again.
-
-### 1.1) Direction of growth of the stack
-ECL_STACK_DIR=down
-
-### 1.2) Choose an integer datatype which is large enough to host a pointer
-CL_FIXNUM_TYPE="long long int"
-CL_FIXNUM_BITS=64
-CL_FIXNUM_MAX=2305843009213693951LL
-CL_FIXNUM_MIN=-2305843009213693952LL
-CL_INT_BITS=32
-CL_LONG_BITS=64
-
-### 1.3) Order of bytes within a word
-ECL_BIGENDIAN=no
-
-### 1.4) What characters signal an end of line. May be LF (Linefeed or \n)
-###      CR (Carriage return or \r), and CRLF (CR followed by LF).
-ECL_NEWLINE=LF
-
-### 1.5) Can we guess how many characters are available for reading from
-###      the FILE structure?
-###          0 = no
-###          1 = (f)->_IO_read_end - (f)->_IO_read_ptr
-###          2 = (f)->_r
-###          3 = (f)->_cnt
-ECL_FILE_CNT=0
-
-###
-### 1.6) Other integer types (set to 'no' to disable)
-###
-ECL_STDINT_HEADER="#include <stdint.h>"
-ECL_UINT8_T=uint8_t
-ECL_UINT16_T=uint16_t
-ECL_UINT32_T=uint32_t
-ECL_UINT64_T=uint64_t
-ECL_INT8_T=int8_t
-ECL_INT16_T=int16_t
-ECL_INT32_T=int32_t
-ECL_INT64_T=int64_t
-ECL_LONG_LONG_BITS=no
-
-###
-### 1.7) Other features (set to 'no' to disable)
-###
-ECL_WORKING_ENVIRON=yes
-
-### 2) To cross-compile ECL so that it runs on the system
-###		powerpc64le-unknown-linux-gnu
-### you need to first compile ECL on the system in which you are building
-### the cross-compiled files, that is
-###		x86_64-unknown-linux-gnu
-### By default we assume that ECL can be accessed from some directory in
-### the path.
-ECL_TO_RUN=/usr/bin/ecl

srcpkgs/ecl/patches/fix-libffi-system.patch

@@ -1,16 +0,0 @@
-Source: @pullmoll
-Upstream: no
-Reason: ffitarget.h no longer defines FFI_SYSV for *nix
-
---- a/src/c/ffi.d	2016-12-19 11:25:00.000000000 +0100
-+++ b/src/c/ffi.d	2020-04-25 13:29:05.385149890 +0200
-@@ -133,8 +133,6 @@
- #elif defined(X86_WIN64)
-   {@':win64', FFI_WIN64},
--#elif defined(X86_ANY) || defined(X86) || defined(X86_64)
--  {@':cdecl', FFI_SYSV},
--  {@':sysv', FFI_SYSV},
-+#elif defined(X86_64)
-   {@':unix64', FFI_UNIX64},
- #endif
- };

srcpkgs/ecl/patches/fix-math_fenv_h.patch

@@ -1,99 +1,31 @@
 Source: @pullmoll
-Upstream: no
+Upstream: https://gitlab.com/embeddable-common-lisp/ecl/-/issues/653#note_675299471
 Reason: Some architectures do not define all of the FE_.. constants
+Example: mips-musl needs this
 
---- a/src/h/impl/math_fenv.h	2016-12-19 11:25:00.000000000 +0100
+diff --git a/src/h/impl/math_fenv.h b/src/h/impl/math_fenv.h
-+++ b/src/h/impl/math_fenv.h	2020-04-25 15:36:04.984693324 +0200
+index ea13d87b4..2afbb9549 100644
-@@ -67,8 +67,27 @@
+--- a/src/h/impl/math_fenv.h
- #endif /* !HAVE_FENV_H */
++++ b/src/h/impl/math_fenv.h
- 
+@@ -55,6 +55,21 @@
- #if defined(HAVE_FENV_H) && !defined(HAVE_FEENABLEEXCEPT) && !defined(ECL_AVOID_FPE_H)
+ #ifdef HAVE_FENV_H
--# define ECL_USED_EXCEPTIONS (FE_DIVBYZERO|FE_INVALID|FE_OVERFLOW|FE_UNDERFLOW)
+ # define ECL_WITHOUT_FPE_BEGIN do { fenv_t env; feholdexcept(&env);
--# define ECL_MATHERR_CLEAR feclearexcept(FE_ALL_EXCEPT)
+ # define ECL_WITHOUT_FPE_END        fesetenv(&env); } while (0)
-+#if !defined(FE_DIVBYZERO)
++# if !defined(FE_DIVBYZERO)
-+#define FE_DIVBYZERO 0
++#  define FE_DIVBYZERO 0
-+#endif
++# endif
-+#if !defined(FE_INVALID)
++# if !defined(FE_INVALID)
-+#define FE_INVALID 0
++#  define FE_INVALID 0
-+#endif
++# endif
-+#if !defined(FE_OVERFLOW)
++# if !defined(FE_OVERFLOW)
-+#define FE_OVERFLOW 0
++#  define FE_OVERFLOW 0
-+#endif
++# endif
-+#if !defined(FE_UNDERFLOW)
++# if !defined(FE_UNDERFLOW)
-+#define FE_UNDERFLOW 0
++#  define FE_UNDERFLOW 0
-+#endif
++# endif
-+#if !defined(FE_INEXACT)
++# if !defined(FE_INEXACT)
-+#define FE_INEXACT 0
++#  define FE_INEXACT 0
-+#endif
++# endif
-+#if !defined(FE_ALL_EXCEPT)
+ #else
-+#define FE_ALL_EXCEPT 0
+ # define FE_INVALID 1
-+#endif
+ # define FE_DIVBYZERO 2
-+
-+# define ECL_USED_EXCEPTIONS (FE_DIVBYZERO|FE_INVALID|FE_OVERFLOW|FE_UNDERFLOW)
-+# define ECL_MATHERR_CLEAR feclearexcept(FE_ALL_EXCEPT)
- # define ECL_MATHERR_TEST do {                                  \
-         int bits = fetestexcept(ECL_USED_EXCEPTIONS);           \
-     unlikely_if (bits) ecl_deliver_fpe(bits); } while(0)
---- a/src/c/unixint.d	2016-12-19 11:25:00.000000000 +0100
-+++ b/src/c/unixint.d	2020-04-25 15:57:15.864783964 +0200
-@@ -655,22 +655,36 @@
- #else /* !_MSC_VER */
- # if defined(HAVE_FENV_H) & !defined(ECL_AVOID_FENV_H)
-         code = fetestexcept(FE_ALL_EXCEPT);
-+#if defined(FE_DIVBYZERO)
-         if (code & FE_DIVBYZERO) {
-                 condition = @'division-by-zero';
-                 code = FE_DIVBYZERO;
--        } else if (code & FE_INVALID) {
-+        } else
-+#endif
-+#if defined(FE_INVALID)
-+        if (code & FE_INVALID) {
-                 condition = @'floating-point-invalid-operation';
-                 code = FE_INVALID;
--        } else if (code & FE_OVERFLOW) {
-+        } else
-+#endif
-+#if defined(FE_OVERFLOW)
-+        if (code & FE_OVERFLOW) {
-                 condition = @'floating-point-overflow';
-                 code = FE_OVERFLOW;
--        } else if (code & FE_UNDERFLOW) {
-+        } else
-+#endif
-+#if defined(FE_UNDERFLOW)
-+        if (code & FE_UNDERFLOW) {
-                 condition = @'floating-point-underflow';
-                 code = FE_UNDERFLOW;
--        } else if (code & FE_INEXACT) {
-+        } else
-+#endif
-+#if defined(FE_INEXACT)
-+        if (code & FE_INEXACT) {
-                 condition = @'floating-point-inexact';
-                 code = FE_INEXACT;
-         }
-+#endif
-         feclearexcept(FE_ALL_EXCEPT);
- # endif
- #endif /* !_MSC_VER */
-@@ -1160,7 +1174,19 @@
- {
-         cl_env_ptr the_env = ecl_process_env();
- #ifndef FE_ALL_EXCEPT
-+#if !defined(FE_DIVBYZERO)
-+#define FE_DIVBYZERO 0
-+#endif
-+#if !defined(FE_OVERFLOW)
-+#define FE_OVERFLOW 0
-+#endif
-+#if !defined(FE_UNDERFLOW)
-+#define FE_UNDERFLOW 0
-+#endif
-+#if !defined(FE_INVALID)
-+#define FE_INVALID 0
-+#endif
- # define FE_ALL_EXCEPT FE_DIVBYZERO | FE_OVERFLOW | FE_UNDERFLOW | FE_INVALID
- #endif
-         const int all = FE_ALL_EXCEPT;
-         int bits = 0;

srcpkgs/ecl/template

@@ -1,7 +1,7 @@
 # Template file for 'ecl'
 pkgname=ecl
-version=16.1.3
+version=21.2.1
-revision=2
+revision=1
 build_style=gnu-configure
 configure_args="--enable-gmp=system --enable-boehm=system
  --enable-libatomic=system --with-dffi=system"
@@ -13,10 +13,10 @@ maintainer="Kyle Nusbaum <knusbaum+void@sdf.org>"
 license="LGPL-2.1-or-later"
 homepage="https://common-lisp.net/project/ecl/"
 distfiles="https://common-lisp.net/project/ecl/static/files/release/ecl-${version}.tgz"
-checksum=76a585c616e8fa83a6b7209325a309da5bc0ca68e0658f396f49955638111254
+checksum=b15a75dcf84b8f62e68720ccab1393f9611c078fcd3afdd639a1086cad010900
 
 if [ "$CROSS_BUILD" ]; then
 	# Depend on system ecl
 	hostmakedepends+=" ecl"
-	configure_args+=" --with-cross-config=${XBPS_SRCPKGDIR}/ecl/files/${XBPS_TARGET_MACHINE}.conf"
+	configure_args+=" --with-cross-config=${XBPS_SRCPKGDIR}/ecl/files/cross_config"
 fi