firmware/src/main.cpp

#include "main.hpp"
#include "secrets.hpp"
#include <FastLED.h>

#define WIRE Wire

#define SERVO_PIN 14         // D5
#define POTENTIOMETER_PIN A0 // A0
#define BUZZER_PIN 12        // D6
#define LEDSTRIPE_PIN 15     // D8

// buttons
#define TACTILE_BTN_LEFT 0  // D3
#define TACTILE_BTN_RIGHT 2 // D4
#define TOUCH_BTN_PIN 16    // D0

// RFID
#define PN532_IRQ 13                        // D7
#define PN532_RESET 12                      // D6 (not connected)
Adafruit_PN532 nfc(PN532_IRQ, PN532_RESET); // RFID with I2C

// OLED display
#define DISPLAY_PIN 4 // D2 (SDA)
auto display = Adafruit_SSD1306(128, 32, &WIRE);

// FastLED
#define PIXELCOUNT 20
CRGB leds[PIXELCOUNT]; // Define the array of leds

// util classes
ContinuousServo contServo(SERVO_PIN);
TeaTimer teaTimer(&contServo);
SmartRFID smartRFID(&nfc);
SmartDial smartDial(POTENTIOMETER_PIN);
SmartDisplay smartDisplay(&display);
TeaNetworking teaNet;

SmartSound sound(BUZZER_PIN);

SmartButton buttonLeft(TACTILE_BTN_LEFT);
SmartButton buttonRight(TACTILE_BTN_RIGHT);

// networking
String shuttleServer = "https://ias-tea-axum.shuttleapp.rs";

TeaData currentTea("Teafault", "c0derfid", 100, 30);

enum State
{
  WAIT_FOR_RFID_SCAN,
  DISPLAY_SCANNED_TEA_CONFIG,
  ADD_NEW_TEA_CONFIG,
  STEEPING_IN_PROGRESS,
  NETWORKING_DEBUG,
};
State state = State::WAIT_FOR_RFID_SCAN;

void setup()
{
  Serial.begin(9600);

  // FastLED setup
  FastLED.addLeds<WS2812B, LEDSTRIPE_PIN, RGB>(leds, PIXELCOUNT);
  FastLED.clear(true);
  FastLED.show();
  delay(2000);

  leds[0].setRGB(2, 0, 0);
  FastLED.show();
  delay(1000);

  leds[10].setRGB(0, 2, 0);
  FastLED.show();
  delay(1000);

  leds[19].setRGB(0, 0, 2);
  FastLED.show();
  delay(1000);

  teaNet.init(ssid, password);

  smartRFID.init();

  Serial.println("Initializing OLED...");
  display.begin(SSD1306_SWITCHCAPVCC, 0x3C, false); // Address 0x3C for 128x32
  printMsg("Tea is Great!");

  delay(1000);

  pinMode(LED_BUILTIN, OUTPUT);
  pinMode(TOUCH_BTN_PIN, INPUT);

  buttonLeft.init();
  buttonRight.init();
}

void loop()
{

  contServo.tick();

  switch (state)
  {
  case NETWORKING_DEBUG:
  {
    if (!teaNet.wifiConnected())
    {
      state = WAIT_FOR_RFID_SCAN;
      break;
    }
    JSONVar jsonData = teaNet.httpsGETRequest(shuttleServer + "/alltea");
    Serial.println("JSON:");
    Serial.println(jsonData[2]["teaname"]);
    delay(2000);

    String payload = teaNet.createTeaData("Unnamed Tea", "g8OhgB5", 90, 180);
    teaNet.httpsPOSTRequest("https://ias-tea-axum.shuttleapp.rs/addtea", payload);

    state = WAIT_FOR_RFID_SCAN;
    break;
  }
  case WAIT_FOR_RFID_SCAN:
  {
    smartDisplay.printWaitForRFIDScreen();

    // this blocks execution until a tag has been detected
    String uid = smartRFID.readTag();

    display.println(uid);
    display.display();
    delay(1000);

    display.println("Success!");
    display.display();
    delay(500);

    JSONVar result = teaNet.httpsGETRequest(shuttleServer + "/teabyrfid/" + uid);
    Serial.print("Result:");
    Serial.println(result);

    if (JSONVar::stringify(result) == "null")
    {
      Serial.print("TEA DOES NOT EXIST YET!");
      String payload = teaNet.createTeaData("Unnamed Tea", uid, 90, 180);
      teaNet.httpsPOSTRequest("https://ias-tea-axum.shuttleapp.rs/addtea", payload);
      result = teaNet.httpsGETRequest(shuttleServer + "/teabyrfid/" + uid);
    }

    currentTea = TeaData(result["teaname"], result["rfidcode"], result["watertemp"], result["steepingseconds"]);

    state = State::DISPLAY_SCANNED_TEA_CONFIG;

    break;
  }
  case DISPLAY_SCANNED_TEA_CONFIG:
  {
    // int dir = smartDial.smoothEdit(&currentTea.m_steepingSeconds, 0, 6000);

    if (buttonLeft.isJustPressed())
    {
      currentTea.m_steepingSeconds -= 10;
    }
    if (buttonRight.isJustPressed())
    {
      currentTea.m_steepingSeconds += 10;
    }
    smartDisplay.printTeaConfigScreen(currentTea.m_teaName, currentTea.m_steepingSeconds, 0);

    if (isBtnPressed() && currentTea.m_steepingSeconds <= 0)
    {
      // rickroll
      Serial.println("Easter");
      sound.play(SmartSound::NeverGonna, 155);
      break;
    }

    // change state if start pressed
    if (isBtnPressed())
    {
      teaTimer.beginSteeping(10000);
      state = State::STEEPING_IN_PROGRESS;
    }
    break;
  }
  case ADD_NEW_TEA_CONFIG:
  {
    break;
  }
  case STEEPING_IN_PROGRESS:
  {
    teaTimer.tick();
    if (teaTimer.isSteeping())
    {
      auto r = teaTimer.remainingSteepTimeSeconds();
      smartDisplay.printTeaSteepingProgressScreen(currentTea.m_teaName, r);
    }
    else
    {
      printMsg("DONE");
      if (!contServo.isTurning())
      {
        delay(2000);
        state = State::WAIT_FOR_RFID_SCAN;
      }
    }
    break;
  }
  };
}

void toggle_led()
{
  digitalWrite(LED_BUILTIN, !digitalRead(LED_BUILTIN));
}

bool isBtnPressed()
{
  return digitalRead(TOUCH_BTN_PIN) == HIGH;
}

void printMsg(const String &s)
{
  display.clearDisplay();
  display.setTextColor(WHITE);
  display.setTextSize(1);
  display.setCursor(0, 10);
  display.println(s);
  display.display();
}
void printMsg(unsigned long l)
{
  display.clearDisplay();
  display.setTextColor(WHITE);
  display.setTextSize(1);
  display.setCursor(0, 10);
  display.println(l);
  display.display();
}